 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN544G PNP/NPN Epitaxial Planar Silicon Transistors 2SA1011/2SC2344 High-Voltage Switching, AF Power Amp, 100W Output Predriver Applications Package Dimensions unit:mm 2010C [2SA1011/2SC2344] 10.2 3.6 5.1 4.5 1.3 2.7 18.0 5.6 1.2 0.8 14.0 15.1 6.3 0.4 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25C 2.55 2.55 Conditions 2.7 ( ) : 2SA1011 1 2 3 1 : Base 2 : Collector 3 : Emitter SANYO : TO220AB Ratings (-)180 (-)160 (-)6 (-)1.5 (-)3 25 150 -55 to +150 Unit V V V A A W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Base-to-Emitter Voltage Rank hFE D 60 to 120 Symbol ICBO IEBO hFE fT Cob VBE E 100 to 200 Conditions VCB=(-)120V, IE=0 VEB=(-)4V, IC=0 VCE=(-)5V, IC=(-)300mA VCE=(-)10V, IC=(-)50mA VCB=(-)10V, f=1MHz VCE=(-)5V, IC=(-)10mA Ratings min typ max (-)10 (-)10 60* 100 (30) 23 (-)1.5 200* Unit A A MHz pF pF V * : The 2SA1011/2SC2344 are classified by 300mA hFE as follows : Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 70502TN (KT)/71598HA (KT)/30196TS APS 8-3288/D251MH/3207AT/2265MY, TS No.544-1/4 2SA1011/2SC2344 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Fall Time Storage Time Symbol VCE(sat) Conditions IC=(-)500mA, IB=(-)50mA (-)180 (-)160 (-)6 (0.29) 0.15 (0.19) 0.48 (0.48) 0.81 Ratings min typ (-0.5) 0.3 max Unit V V V V V s s s V(BR)CBO IC=(-)1mA, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)10mA, IC=0 ton tf tstg See specified Test Circuit See specified Test Circuit See specified Test Circuit Switching Time Test Circuit IB1 INPUT 1 IB2 VR 200 1F OUTPUT 40 1F 20V PW=20s 51 --2V 10IB1=--10IB2=IC=0.5A (For PNP, the polarity is reversed.) --1.0 IC -- VCE 2SA1011 1.0 IC -- VCE 2SC2344 8 mA Collector Current, IC - A Collector Current, IC - A --0.8 A --8m --7mA --6mA --5mA 0.8 7mA 6mA 5mA 4mA --0.6 0.6 --4mA --3mA --2mA --0.4 0.4 3mA 2mA --0.2 0.2 --1mA 0 0 1mA IB=0 --10 --20 --30 --40 --50 ITR02941 0 IB=0 0 10 20 30 40 50 ITR02942 Collector-to-Emitter Voltage, VCE - V --2.4 Collector-to-Emitter Voltage, VCE - V 2.4 IC -- VBE 2SA1011 VCE=--5V IC -- VBE 2SC2344 VCE=5V --2.0 2.0 Collector Current, IC - A Collector Current, IC - A --1.6 1.6 --1.2 1.2 C --0.8 75 0.8 5 C 25 C 5 C 12 0.4 0 0 0.2 0.4 0.6 75 0.8 C C Ta= --25 C 1.0 1.2 12 C 25 0 0 --0.2 --0.4 --0.6 --0.8 Ta= -- --0.4 --1.0 --1.2 --1.4 25 1.4 Base-to-Emitter Voltage, VBE - V ITR02943 Base-to-Emitter Voltage, VBE - V ITR02944 No.544-2/4 2SA1011/2SC2344 1000 7 5 3 2 hFE -- IC 2SA1011 VCE=--5V 75C 1000 7 5 3 2 hFE -- IC 75C 125C 25C 2SC2344 VCE=5V DC Current Gain, hFE DC Current Gain, hFE 125C 25C 100 7 5 3 2 10 7 5 3 2 1.0 7 --0.01 2 3 5 100 7 5 3 2 10 7 5 3 2 Ta=--25C Ta=--25C 7 --0.1 2 3 5 7 --1.0 2 3 5 1.0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC - A 3 ITR02945 5 Collector Current, IC - A ITR02946 fT -- IC VCE=10V 2SC2 344 Cob -- VCB f=1MHz Gain-Bandwidth Product, fT - MHz 2 3 100 7 5 3 2 Output Capacitance, Cob - pF 2 100 7 5 3 2 2SA101 1 2SA10 11 2SC2 344 10 7 5 3 0.001 10 7 5 3 2 1.0 2 3 5 (For PNP, minus sign is omitted.) 2 3 5 7 0.01 2 3 5 7 0.1 2 3 (For PNP, minus sign is omitted.) 7 10 2 3 5 Collector Current, IC - A 10 7 5 5 7 1.0 ITR02947 Collector-to-Base Voltage, VCB -- V 7 100 ITR02948 VCE(sat) -- IC IC / IB=10 Collector Current, IC - A ASO 5 3 2 ICP=3A IC=1.5A s 100 ms 10 s 1m tion era Op DC Collector-to-Emitter Saturation Voltage, VCE (sat) - V 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 2 3 5 7 1.0 7 5 3 2 2SA 101 1 0.1 7 5 3 2 2 34 SC2 4 (For PNP, minus sign is omitted.) 0.1 2 3 5 7 1.0 2 3 0.01 (For PNP, minus sign is omitted.) 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC - A ITR02949 Collector-to-Emitter Voltage, VCE - V ITR02950 No.544-3/4 2SA1011/2SC2344 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2002. Specifications and information herein are subject to change without notice. PS No.544-4/4 |
Price & Availability of 2SC2344
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |